The tooth carving machine is mainly used for the forming and processing of denture products. The main processing materials are zirconia, resin, ceramics, etc
Main performance features
1.High precision: the runout of the taper hole of the spindle is ≤ 0.001mm, the dynamic precision stability of the spindle is high during processing, and the surface finish of the workpiece is effectively guaranteed.
2.High efficiency: the maximum rotation speed of the spindle reaches 60000rpm, and the material removal rate is significantly improved during processing. So as to ensure high efficiency processing.
3.High reliability: the main shaft is equipped with motor temperature control sensor to monitor the temperature of the main shaft during the processing in real time, and the famous brand high-precision ceramic ball bearing is used to ensure the long-life and reliable operation of the main shaft.
4.High energy saving cooling: the main shaft adopts air cooling mode, cooling air takes away the heat generated by bearing and processing, suppresses the temperature rise of main shaft, and reduces its impact on processing quality. At the same time, air curtain seal is provided for the main shaft to prevent dust and coolant from entering the bearing. Our company's dgz-03360 / 0.25-pg denture processing electric spindle cooling and air seal air flow rate are 50% lower than similar products in the market, greatly reducing the use cost of customers
|bearing||ceramic ball bearing|
|chuck clamping range(mm)||Φ3-Φ4|
|brake method||driver+brake resistor|
|Maximum Speed (rpm)||60000|
|tool change method||air cylinder|
|cooling or lubricant air flow(L/min)||28-32 (air)|
|motor system||asynchronous motor|
|bearing lubricant method||grease lubrication|
|motor heat protection||KTY|
|connector type||no connector|
|EC / SE line length||>0.8m|
|rotation direction(from front side)||counterclockwise(forward)|